CERAMIC FILTERS
Enter your filter requirements and click the "Design Now" button.
*For requirements outside our standard range contact">Application Engineering Dept.
Center Frequency
mhz		 Center Frequency
The frequency range for this family of filters is (400mhz - 3000mhz)
Minimum Bandwidth
across mhz 		Relative Bandwidth
(Allowable 3dB bandwidth for these filters is 1% - 5% of Center Frequency)
Insertion Loss
dB max. 		Maximum Insertion Loss
Loss at center frequency or across a passband you define below.
I.L. Passband
Mhz 		Passband Insertion Loss (optional)
Enter passband over which Insertion Loss must be met.
Group Delay
Ns at center 		Maximum Group Delay (optional)
Group delay at center frequency.
Resonator / Sections
/ 		Resonator Size / Sections (optional)
These parameters greatly affect your filter physical dimensions but will also impact Insertion Loss and Rejection.

REJECTION AND MARKERS (optional)
Below you may define up to 4 Rejection points. Rejection points consist of an attenuation level and a frequency and are measured relative to loss at center frequency. You may also define up to 4 Marker frequencies. Markers aid in reading filter response plots but in no way affect filter design.
-- Rejection 60dBc max -- -- Markers --
Attenuation @ Frequency
dBc min @mhz		 Frequency
mhz
dBc min @mhz mhz
dBc min @mhz mhz
dBc min @mhz mhz